Paradigm® Reference
Click image to enlargeSA-35 v.3
3-driver, 2-1/2-way in-wall / in-ceiling, die-cast chassis / mounting bracket
Sound Advances With unprecedented timbral accuracy, stunning dimensional imaging and striking bass articulation, SA speakers provide breathtaking high-end sound. Refreshingly, however, their price won’t take your breath away. Instead, we predict a sigh of relief! Full-Perimeter Bracket Design. Unlike typical mounting ears, brackets cover the full diameter or height and width of the speaker chassis to effectively sandwich and strengthen the area around the mounting hole. State-of-the-Art G-PAL™ Gold-Anodized Pure-Aluminum Domes. Ferro-fluid cooled and damped. Exceptionally rigid, low-mass domes with treated textile suspensions ensure extremely uniform and instantaneous high-frequency response. State-of-the-Art S-PAL™ Satin-Anodized Pure-Aluminum Cones. High stiffness-to-mass ratio. Outstanding internal damping. The result? Remarkable midrange clarity, superb extended bass and tremendous freedom from unwanted resonances and distortions. State-of-the-Art Mineral-Filled Co-Polymer Polypropylene Bass Cones. Highly damped and tremendously rigid for tight, well-defined and deep low-frequency response with a weight and authority that does justice to music and movies. High-Pressure Ultra-Rigid™ Die-Cast Aluminum Chassis and Mounting Brackets (selected models). Dramatic reduction in resonances and standing waves. Aluminum chassis also serves as a very effective heatsink. High-Strength GRIP™ Glass-Reinforced Injection-Molded Polymer Chassis and Mounting Brackets (selected models). Increased strength and the rigid design reduce the problems associated with structural flexibility mentioned earlier in this catalog. * DIN 45 500. Indicates -3 dB in a typical listening room. † With typical program source, provided the amplifier clips ** Depth required is the distance between 1/2˝ drywall, or similar material. Overview

Specifications
SPECIFICATIONS
Design
3-driver, 2-1/2-way in-wall / in-ceiling,
die-cast chassis / mounting bracket
Crossovers
3rd-order electro-acoustic at 2.0 kHz;
2nd-order electro-acoustic at 500 Hz
(lower bass driver)
High-Frequency Driver
25-mm (1 in) G-PAL™ dome,
die-cast heatsink faceplate
Bass / Midrange Driver
210-mm (8 in) S-PAL™ cone,
38-mm (1-1/2 in) voice-coil,
die-cast chassis
Bass Driver
210-mm (8 in) mineral-filled polypropylene
cone, 38-mm (1-1/2 in) voice-coil,
die-cast chassis
Low-Frequency Extension*
34 Hz (DIN)
Frequency Response:
On-Axis
30° Off-Axis
±2 dB from 46 Hz - 22 kHz
±2 dB from 46 Hz - 20 kHz
Sensitivity - Room / Anechoic
96 dB / 92 dB
Suitable Amplifier Power Range
15 - 250 watts
Maximum Input Power†
180 watts
Impedance
Compatible with 8 ohms
External Dimensions:
(D or H x W)51.0 cm x 23.1 cm
20-1/16 in x 9-1/16 in
Minimum Mounting Depth**
7.6 cm
3 in
Cutout Dimensions:
(D or H x W)48.6 cm x 20.7 cm
19-2/16 in x 8-3/16 in
Minimum Internal Volume Required
40 L / 1.4 cu ft
Weight (unpacked)
7.1 kg / 15.6 lb each
Finish
White, paintable
Pre-Construction Bracket (sold sep.)
PB-8x19; retrofit included
no more than 10% of the time.




RVC-12SQ
X-850
SA-10R v.3
SA-15R v.3
SA-15R-30 v.3
SA-15R-SM v.3
SA-25 v.3
SA-30 v.3
SA-ADP v.3
SA-LCR 3 v.3

